Por favor seleccione el país de entrega adecuado

Algunos factores como el precio de los productos, su disponibilidad u otros servicios pueden verse afectados por la selección del país de entrega.
¡Llega la Orange week de igus!
del 25 al 30 de noviembre !Descubra la promoción aquí!

Cree ahora su cuenta compre online y ahorre

atención al cliente
Contacto
igus® S.L.U.

Ctra. Llobatona, 6

Poligono Noi del Sucre

08840 Viladecans Barcelona

+34 93 647 39 50
+34 93 647 39 51
ES(ES)

Tuerca para husillo cilíndrica, trapezoidal, J350SRM drylin®

  • Material: iglidur® J350
  • Dirección de la rosca: Rosca a la derecha
  • Tipo de rosca: Rosca trapezoidal
  • Diseño: Estándar
  • Tuerca cilíndrica
Descripción del producto
Lead screw nut made of iglidur® J350 - High-temperature material for temperatures up to +150°C
Our lead screw nut made of the high-performance polymer iglidur® J350 enables the application at permanently medium to high ambient temperatures. The long-term application temperature ideally should be between +60 and + 150°C in order to obtain the maximum performance out of the material.
Other advantages include:
 
► Dimensionally stable even at high temperatures
► Certifiable according to EN 45545 HL3, R24
► Especialmente pensado para la industria ferroviaria
► Good coefficient of friction at medium loads
► Application range up to +150°C upper long-term application temperature
► Permissible permanent surface pressure in the thread turns 0 - 3.0MPa


___________________________________________________________________________________________________________________________

All of our lead screw nuts are made from the wear-resistant iglidur® high-performance polymers.
There are seven different standard materials available for different purposes: iglidur J - high efficiency at all speeds, iglidur J350 - for temperatures up to +150°C, iglidur A180 - FDA-compliant for the food and pharmaceutical industry, iglidur E7 - for high speeds with low loads, iglidur R - anti-oscillation and anti-vibration, iglidur J200 - the best counter partner for aluminium and iglidur W300 - for heavy-duty applications. 

This gives you the following advantages:
100% lubrication-free and maintenance-free
Durable and robust in adverse environments
Chemical resistant and mould-free
Quiet and vibration-free travel
PTFE-free
FDA compliance through A180
Withstanding high loads
Long-term use in temperature ranges from -20°C to +150°C

The base material is additionally reinforced with technical fibres or fillers. The solid lubricants are microscopic particles, embedded in millions of tiny chambers of the material. This is adequate to sufficiently lubricate the immediate surrounding area and to reduce the friction of the system. These additives significantly stabilise our lead screw nuts for wear resistance.

In addition to a large selection of standard materials for lead screw technology, igus also offers a wide range of variants in the lead screw nut geometry itself:
Tuercas cilíndricas
Tuerca cilíndrica con plano llave
Tuercas con valona
Tuerca con valona con plano llave
Geometría de la tuerca de alta resistencia
Tuercas de husillo cilíndricas fabricadas mediante inyección
Tuercas con valona fabricadas mediante inyección
Datos técnicos
Accesorios
Descargas

Otras soluciones

Consultas

Estaré encantado de responder a sus preguntas personalmente.

Consultas y envíos

En persona:

De lunes a viernes de 8:00 a 18:00h

Online:

24h