Por favor seleccione el país de entrega adecuado

Algunos factores como el precio de los productos, su disponibilidad u otros servicios pueden verse afectados por la selección del país de entrega.
Contacto
igus® S.L.U.

Ctra. Llobatona, 6

Poligono Noi del Sucre

08840 Viladecans Barcelona

+34 93 647 39 50
+34 93 647 39 51
ES(ES)

Tuerca para husillo cilíndrica, de paso largo, JSRM dryspin®

Consulte nuestro catálogo online de tuercas para husillo

  • Material: iglidur® J
  • Dirección de la rosca: Rosca a la derecha
  • Tipo de rosca: Conjunto de tuerca y husillo con rosca helicoidal dryspin®
  • Diseño: Estándar
  • Tuerca cilíndrica
Descripción del producto
Lead screw nut made of iglidur® J - High efficiency at all speeds
Our lead screw nut made of the high-performance polymer iglidur® J is the all-rounder. The material can be used at almost all speeds and is characterised by a high degree of efficiency. Other advantages include:

 Low coefficient of friction - low wear rates
Application range up to +90°C upper long-term application temperature
 Permissible permanent surface pressure in the threads 0 - 4.0MPa


___________________________________________________________________________________________________________________

All of our lead screw nuts are made from the wear-resistant iglidur® high-performance polymers.
There are seven different standard materials available for different purposes: iglidur J - high efficiency at all speeds, iglidur J350 - for temperatures up to +150°C, iglidur A180 - FDA-compliant for the food and pharmaceutical industry, iglidur E7 - for high speeds with low loads, iglidur R - anti-oscillation and anti-vibration, iglidur J200 - the best counter partner for aluminium and iglidur W300 - for heavy-duty applications. 

This gives you the following advantages according to the materials:
100% lubrication-free and maintenance-free
Durable and robust in adverse environments
Chemical resistant and mould-free
Quiet and vibration-free travel
PTFE-free
FDA compliance through A180
Withstanding high loads
Long-term use in temperature ranges from -20°C to +150°C

The base material is additionally reinforced with technical fibres or fillers. The solid lubricants are microscopic particles, embedded in millions of tiny chambers of the material. This is adequate to sufficiently lubricate the immediate surrounding area and to reduce the friction of the system. These additives significantly stabilise our lead screw nuts for wear resistance.

In addition to a large selection of standard materials for lead screw technology, igus also offers a wide range of variants in the lead screw nut geometry itself:
Tuercas cilíndricas
Tuerca cilíndrica con plano llave
Tuercas con valona
Tuerca con valona con plano llave
Geometría de la tuerca de alta resistencia
Tuercas de husillo cilíndricas fabricadas mediante inyección
Tuercas con valona fabricadas mediante inyección
Datos técnicos
Accesorios
Descargas

Otras soluciones

Consultas

Estaré encantado de responder a sus preguntas personalmente.

Consultas y envíos

En persona:

De lunes a viernes de 8:00 a 18:00h

Online:

24h