Name: drygear® apiro® installation option vertical flange (RL-A54.0100)
Brand: drygear
SKU: RL-A54.0100
Price: 19.20 EUR
Availability: InStock

Tecnología de reductores drygear

Reductor modular Apiro

Accesorios apiro

drygear® apiro® installation option vertical flange

Tutoriales en vídeo sobre los sistemas de control de motores D1

Encuentre la rótula adecuada para
su aplicación: simplemente introduzca sus requisitos y reciba propuestas adecuadas.
.

Calcule el suplemento del cobre actual para su cable aquí.

¿No ha encontrado el eje adecuado? A continuación, sólo tiene que configurar su eje como desee.

¿Desea una cadena portacables lista para conectar, con cables opcionales, o no está seguro de si la cadena seleccionada es adecuada para su aplicación? Deje que nuestro configurador experto en cadenas portacables seleccione y calcule la cadena portacables adecuada en función de los datos de su aplicación.

Encuentre rápidamente el rodillo transportador perfecto para su aplicación: introduzca simplemente sus requisitos y recibirá los rodillos transportadores adecuados con un cálculo de la desviación prevista .

Encuentre rápidamente el rodamiento de bolas perfecto para su aplicación: solo tiene que introducir sus requisitos y se mostrarán los rodamientos de bolas adecuados con su vida útil calculada.

Ahora puede solicitar cables individuales chainflex® con longitudes a partir de 1.000 m en tan solo 3 minutos. El precio de los cables se actualiza diariamente.

Instrucciones en vídeo para aplicaciones, puesta en marcha y asistencia con su sistema de control de motores

Introduzca el recorrido, el radio de curvatura y la aceleración, y obtenga la vida útil de su cable chainflex

Encuentre y solicite rápidamente cables de accionamiento confeccionados conforme a los estándares del fabricante.

El motor drylin E adecuado en unos pocos clics. Simplemente introduzca sus requisitos y recibirá sugerencias adaptadas a su aplicación.

Seleccione y pida una solución personalizada entre más de 950 cables y 3.500 conectores listos para conectar.

<h3 style="text-align:start;">¿Necesita un mecanizado de husillos a medida?</h3>
Configure husillos online de forma rápida y fácil.

With the help of the inner separation configurator you can create a layout of the needed cables in the e-chain and get a feeling if there is enough space for every cable and where is the best position inside the e-chain.&nbsp;

Selección de productos y cálculo de la vida útil. Introduciendo los parámetros de la aplicación, obtendrá la vida útil esperada de los cojinetes iglidur®.

Utilice la calculadora de vida útil para determinar la durabilidad de una cadena portacables.

Asesoramiento en la selección del conjunto de tuerca y husillo para su aplicación, cálculo de la vida útil para la configuración del conjunto, descarga de PDF con todos los detalles sobre la aplicación deseada

Procesamiento personalizado de extremos mecanizados sin necesidad de software CAD, plano 2D ni archivo STEP 3D: generación online, cálculo de precio inmediato, pedido directo online o solicitud de presupuesto.

En tres pasos, el experto de igubal® le pregunta sobre sus requisitos para cojinetes autoalineables igubal® y le proporciona un análisis completo de idoneidad y vida útil de todos los productos igubal®. Puede comparar los resultados y pedir directamente el cojinete igubal® más adecuado a través de la tienda online de igus®..

Varios tipos y longitudes de cables disponibles como stock remanente en condiciones atractivas.

¿No encuentra el tamaño adecuado? Configúrelo aquí.

Con unos pocos clics, puede fabricar un eje lineal completo, incluyendo el motor, los cables de conexión y las piezas integradas.

¿Le falta algo? A continuación, sólo tiene que configurar usted mismo la solución que desee. Utilice nuestro configurador

Ahorre tiempo y dinero con programas de muestra gratuitos para su sistema de control de motores

¿Tiene dudas acerca de su idoneidad? Configúrelo online con nuestro configurador de patines híbridos

El diseñador de cojinetes iglidur® permite visualizar los precios de los cojinetes de fricción en las dimensiones individuales y en el material que prefiera en unos pocos pasos. Al final de la configuración se genera un plano de su cojinete individual y puede hacer el pedido directamente o solicitar más información.

Encuentre fácilmente la solución perfecta para sus aplicaciones: introduzca sus requisitos y reciba la configuración adecuada.

Buscador de productos para cojinetes de fricción iglidur

Disponemos de una amplia gama de procesos de fabricación para la producción de piezas según plano. Estaremos encantados de asesorarle sobre el método más adecuado desde el punto de vista técnico y económico, así como sobre el material plástico óptimo.

Introduzca los parámetros de aplicación y encuentre platos giratorios compatibles con la vida útil calculada en solo unos clics.

The Quickrobot is the easiest and fasted way to get with only a few clicks a complete dresspack for several robot manufacturers and types.&nbsp;

El buscador de productos le ofrece rápidamente una visión general de todos los cables chainflex® disponibles, adaptados específicamente a su aplicación.

Pruebe nuestro sistema de control de motores online con la aplicación gratuita para navegador.

iglidur® H | High temperature and chemical resistance
iglidur® H is a fibre-reinforced thermoplastic material that was specially developed for applications in high humidity or under water. iglidur® H can be used completely free of lubrication; in wet applications, the surrounding media acts as additional lubricant. Suitable for temperatures up to +200°C. Very low coefficient of friction when used with hardened shafts.

Typical applications

Beverage industry
Medical technology
Offshore
Shipbuilding


When to use it?

﻿For underwater applications
When high temperature resistance is required
For high mechanical loading
For applications in contact with chemicals

When not to use it?

When extremely high wear resistance under water is required
When the best universal resistance to chemicals is required
For maximum compressive strength at higher temperatures



iglidur® J350 | Endurance runner with high dimensional stability at temperature - applicable with many shafts and load collectives
A superior material for rotational applications - and that on many different steel shafts: The service life of &lt;span style=&#34;color: rgb(103,118,138);background-color: rgb(255,255,255);font-size: 13px;font-family: Lato, &#34;Helvetica Neue&#34;, Helvetica, Arial, sans-serif;&#34;&gt;iglidur® J350  can often be multiplied at loads between 2MPa and 50MPa. In addition, the high temperature resistance makes it a very versatile material.

Typical applications

Vending machinery
Automotive
Glass industry
Machine tools


When to use it?

When a wear-resistant material for rotational movement at medium and high loads is required
When a cost-effective material is required for use at high temperatures
When press-fit up to +150°C is necessary
When high wear resistance is required at high loads
When the material is exposed to shock loading

When not to use it?

When continuous operating temperatures are higher than +180°C
When the lowest friction is required
When a cost-effective, low-friction mterial is sought
At high peripheral speeds




Food-safe according to FDA
Excellent abrasion resistance and very robust
Accurate surface details
Ideal for worm wheels


Selective laser sintering (SLS) material: iglidur i6
The iglidur i6 material was designed for laser sintering and was especially developed for manufacturing worm wheels for the food &amp; packaging industry. The tests in the igus test laboratory showed a longer service life than for conventionally milled gears - e.g. POM. This significantly increases flexibility in the design of components, because the laser sintering process eliminates the need for tooling and therefore special parts can be manufactured efficiently with no minimum order quantity. Furthermore, iglidur i6 is ideal for snap-on connections due to the higher elongation at break.

When do I use it?

When a food grade material is required
For applications with sliding motion, especially for worm gears
If a white base material is required for subsequent colouring

When not to use it?

When an optically detectable material in blue colour is required (→ iglidur i6-BLUE)
For applications under water or with high humidity (→ iglidur i8-ESD)
If components with ESD specifications are required (→ iglidur i8-ESD or iglidur i9-ESD)
In combination with anodised aluminium as a counter partner (→ iglidur i3)
For spur gear applications (→ iglidur i3)
If the application temperature is higher than 80 °C in the long term (→ iglidur A350 or iglidur RW370)



iglidur H5 was developed especially for use in corrosive environments in which high edge pressures and impact loads also occur.


attributes_iglidur_i3000_3d_druck_material_description

iglidur M260 was specially developed for use in harsh environments. In addition, care was taken during development to be able to use the material particularly well for injection-molded thick-walled bearings. This makes iglidur M260 particularly suitable for applications in which thick-walled bushings are to be used or replaced that are also as robust as possible.



With DIN EN 45545, the new iglidur RW250 material fulfills the strict fire protection requirements of railroad technology. In addition, the material formulation has been optimized for absolute wear resistance and offers very good running properties in many applications.  


iglidur® M250 | The robust all-rounder with outstanding vibration damping
The self-lubricating material iglidur® M250 is particularly characterized by impact strength, vibration damping and wear resistance. It proves itself particularly well under stresses where a vibration-damping function of the material is required, e.g. in sports equipment and packaging machines. As it is also capable of embedding dirt, it is also suitable for agricultural machinery and gardening equipment.

Typical areas of application

agricultural engineering
Mechanical engineering
Furniture / industrial design
Textile industry


When do I use it?

When the material is exposed to heavy soiling
For excellent vibration damping
At low to medium speeds
When mechanical reworking is required
Insensitive to edge pressure
High impact strength
Thick wall thicknesses according to DIN 1850

When should I not use it?

For applications in wet areas
When very high precision is required
For very smooth shafts
When a cost-effective material with maximum wear resistance is required




Electrostatically dissipative (ESD), without interference currents in live parts
Contact resistance 10^6 – 10^9 Ohm x cm
Increased rigidity
Colour: black (continuous)


Selective laser sintering (SLS) material: iglidur i9-ESD
The laser sintering powder iglidur i9-ESD has a electrical resistance of 10^6 to 10^9 Ohm. This makes it electrostatically dissipative (ESD), and at the same time reduces the risk of unwanted discharge currents between sensitive, electrical components. This makes it ideal for applications in the electronics and semiconductor industries, and especially for electronic connectors.

When to use it?

When antistatic components with medium conductivity are needed
For applications under water or with high humidity
When components with high stiffness are required
When components with high UV resistance are required
When black components are required

When not to use it?

If I need ESD parts with better conductivity (→ iglidur i8-ESD)
For worm wheel applications (→ iglidur i6)
If the application requires a food grade material (→ iglidur i6 or iglidur i6-BLUE)
If the application temperature is higher than 80 °C in the long term (→ iglidur A350 or iglidur RW370)



iglidur® PEP - for all shaft surfaces and materials 
iglidur® PEP consists of a combination of two plastic layers. Even threads, rust or scratches do not impair the permanently reliable function. 



Versatile use: good combination of high wear resistance, strength and temperature resistance


Self-lubricating filament iglidur i180 
Components made from the 3D printing material iglidur i180 can be used universally for all types of wear parts, such as plain bearings, gears and drive nuts, as this material has also been specifically developed for moving applications. The higher wear resistance and higher temperature resistance (100°C over the long term) extend the range of application, especially for more dynamic applications with higher surface speeds.

When to use it?

When an increased permanent application temperature of up to 100°C is required
For highly dynamic plain bearing applications


When not to use it?

If the application temperature is higher than 100°C in the long-term, or even higher wear resistance is required (→ iglidur J260)




Flame-retardant, according to UL94-V0 and DIN EN 45545
Temperature-resistant up to + 170 °C
Flexural strength 91 MPa


Fire-retardant high-temperature filament, ideal for the railway industry
iglidur RW370 is an abrasion-resistant, high-temperature tribofilament which was specifically developed for use in railway vehicles. As such, its fire-retardant specifications conform to UL94-V0 and EN45545. In addition, it has the maximum mechanical strength of all tribofilaments and a long-term temperature resistance of 170 °C, which makes it the material of choice for high-temperature applications.

When to use it?

When the application requires high temperature resistance
When the mechanical strength of the other tribofilaments is not sufficient
When fire-retardant specifications are required

When not to use it?

When very high wear resistance at high-temperature load is required (→ iglidur A350)



attributes_iglidur_k230_material_description

attributes_igutex_tx3_material_description


Versatile use: good combination of high wear resistance, strength and temperature resistance
Colour: black

Self-lubricating filament iglidur i180  in black colour
Components made from the 3D printing material iglidur i180-BL can be used universally for all types of wear-resistant parts, such as plain bearings, gears and drive nuts, as this material has also been specifically developed for moving applications. The higher wear resistance and higher temperature resistance (100°C over the long term) extend the range of application, especially for more dynamic applications with higher surface speeds.

When to use it?

When an increased permanent application temperature of up to 100°C is required
For highly dynamic plain bearing applications
If a black material is required

When not to use it?

If the application temperature is higher than 100°C in the long-term, or even higher wear resistance is required (→ iglidur J260) 



Bearings of so-called tracking systems in photovoltaic systems defy particularly adverse environmental conditions. iglidur P UV was developed for this area of application. The special composition ensures high resistance to ultraviolet rays and ensures that components made of iglidur P UV function for a particularly long time and with the least possible loss of strength. 


iglidur® A160 | FDA and EU regulation-compliant for chemicals and food
iglidur® A160 is characterised by extreme media resistance at low costs. Tribologically optimised, the material can be used up to +90°C and also meets the conformity requirements of the food processing sector. The property profile is rounded off by the &#34;optical detectability&#34; often desired in the industry, i.e. the blue colour.

Typical application areas

Beverage industry
Food industry
Medical technology


When to use it?

When a material with maximum media resistance is required
When a cost-effective material with high media resistance is required
When a material conforming to the 10/2011 EC is required

When not to use it?

When a universal material is needed for the food industry
If a very media-resistant material is sought for applications at more than +90°C
When a low-cost material with high wear resistance in dry operation is required




Food compliant according to FDA
Blue colour for optical detectability
Excellent abrasion resistance and toughness
Accurate surface details
Ideal for worm wheels


Selective laser sintering (SLS) material: iglidur i6-BLUE
The iglidur i6-BLUE material, developed for laser sintering, is specifically intended for use as a worm wheel, and for food contact. The tests in the igus test laboratory showed a longer service life than for conventionally milled gears - e.g. POM - This significantly increases flexibility in the design of components, because the laser sintering process eliminates the need for tooling and therefore special parts can be manufactured efficiently with no minimum order quantity. Furthermore, iglidur i6-BLUE is ideal for snap-on connections due to the higher elongation at break.

When do I use it?

When a food-compliant material in a continuous blue colour is required (optical detectability)
For applications with sliding motion, especially for worm gears

When not to use it?

For applications under water or with high humidity (→ iglidur i8-ESD)
If components with ESD specifications are required (→ iglidur i8-ESD or iglidur i9-ESD)
In combination with anodised aluminium as a counter partner (→ iglidur i3)
For spur gear applications (→ iglidur i3)
If the application temperature is higher than 80 °C in the long term (→ iglidur A350 or iglidur RW370)




Extremely robust and rigid with carbon fibre reinforcement
Suitable for structural components and multi-material components
Flexural strength up to 237 MPa, flexural modulus of elasticity of up to 11.5 GPa, improved strength in z-direction


High-strength filament for structural components or as a material partner for multi-material components
igumid P190 is an extremely strong and stiff 3D printed filament due to the reinforcement with carbon fibre. It was specially developed as a partner material for iglidur i190 for the production of very strong and at the same time friction-optimised components in multi-material printing. Furthermore, it can be used for printing stable structural components. Thanks to the high strength and high rigidity, as well as its low density of 1.25g/cm³, igumid P190 is ideal for lightweight construction with low material requirements.

When to use it?

For structural components where high strength and stiffness are required
For special mounting brackets for energy chains
As a multi-material partner with iglidur i190, for the combination of a high-strength material (igumid P190) and a particularly durable plastic (iglidur i190)

When not to use it?
For friction and wear applications (→ iglidur i150 or iglidur i180 or iglidur i190)
If the application requires a food-grade material (→ iglidur i150 or iglidur i151 or iglidur A350)
If the application temperature is higher than 120 °C in the long term (→ iglidur A350 or iglidur RW370)



&lt;span style=&#34;color: rgb(103,118,138);background-color: rgb(255,255,255);font-size: 13px;font-family: Lato, &#34;Helvetica Neue&#34;, Helvetica, Arial, sans-serif;&#34;&gt;Die Werkstoffe der ECON-Serie, iglidur J4, GLW, P4, PLW210, ALW350, HLW und NEU: Q2LW sind nicht nur für viele Anwendungsbereiche bestens geeignet, sondern nun auch im europäischen Markt in Standardabmessungen verfügbar.  
&lt;span style=&#34;color: rgb(103,118,138);background-color: rgb(255,255,255);font-size: 13px;font-family: Lato, &#34;Helvetica Neue&#34;, Helvetica, Arial, sans-serif;&#34;&gt;Vorteile: 

&lt;span style=&#34;color: rgb(103,118,138);background-color: rgb(255,255,255);font-size: 13px;font-family: Lato, &#34;Helvetica Neue&#34;, Helvetica, Arial, sans-serif;&#34;&gt;Universell einsetzbar
&lt;span style=&#34;color: rgb(103,118,138);background-color: rgb(255,255,255);font-size: 13px;font-family: Lato, &#34;Helvetica Neue&#34;, Helvetica, Arial, sans-serif;&#34;&gt;Varianten für hohe Temperaturen
&lt;span style=&#34;color: rgb(103,118,138);background-color: rgb(255,255,255);font-size: 13px;font-family: Lato, &#34;Helvetica Neue&#34;, Helvetica, Arial, sans-serif;&#34;&gt;Lebensmitteleinsatz und Verschleißfestigkeit verfügbar
&lt;span style=&#34;color: rgb(103,118,138);background-color: rgb(255,255,255);font-size: 13px;font-family: Lato, &#34;Helvetica Neue&#34;, Helvetica, Arial, sans-serif;&#34;&gt;Kostengünstig, besonders bei größeren Stückzahlen
&lt;span style=&#34;color: rgb(103,118,138);background-color: rgb(255,255,255);font-size: 13px;font-family: Lato, &#34;Helvetica Neue&#34;, Helvetica, Arial, sans-serif;&#34;&gt;Ca. 50 % reduzierter CO2-Fußabdruck  



attributes_iglidur_q2e_material_description


Higher application temperature up to 110 °C
Highest flexural strength of 94 MPa at 20 °C
PFAS-free
Electrostatic dissipative (ESD)


Selective laser sintering (SLS) material: iglidur i230
The iglidur i230 laser sintering powder stands out as another all-rounder material among the iglidur SLS materials. Unlike iglidur i3, however, it is designed for higher application temperatures and withstands long-term temperatures of up to 110 °C. Moreover, the material is 80 % more wear-resistant than PA12. Of all iglidur SLS materials, iglidur i230 offers the highest flexural strength and, in addtion, it has electrostatically dissipative (ESD) properties.
Good to know: iglidur i230 contains no PTFE and is therefore not affected by future PFAS regulations.

When to use it?

When a PFAS-free material is required
If the application temperature is above 80 °C in the long term and at a maximum of 110 °C
If components with high mechanical strength (also structural components) are required
If components with ESD properties are required up to 110 °C application temperature

When not to use it?

If components with higher wear resistance at max. 80 °C application temperature are required (→ iglidur i3)
If components with ESD properties up to 80 °C application temperature are required (→ iglidur i8-ESD or iglidur i9-ESD)
For worm wheel applications (→ iglidur i6)
If the application requires a food-safe material (→ iglidur i6)
When components with higher elasticity are required (→ iglidur i10)
If the application temperature is higher than 110 °C in the long term (→ iglidur A350 or iglidur RW370)




Flexural strength up to 80 MPa, best iglidur filament
Excellent service life - 50 times higher abrasion resistance than ABS


Flexible and wear-resistant filament - iglidur i190
iglidur i190 is characterised by high wear resistance, as the material is enriched with solid lubricants. It can be processed on regular 3D printers, but a closed 3D printer is recommended. Due to its high wear resistance and excellent mechanical specifications (strength, toughness, coating adhesion), it is an all-round material that is suitable for most applications and 3D printers. Of all igus tribofilaments, only iglidur RW370 has a higher strength than iglidur i190. It can also withstand a long-term application temperature of up to 90 °C (after tempering the component).

When to use it?

For all types of applications where low friction and high wear resistance are important
When higher strengths are required

When not to use it?

If the application temperature is higher than 90 °C in the long term (→ iglidur J260 or iglidur RW370)
For applications under water or with high humidity (→ iglidur i180)
If the application requires a food grade material (→ iglidur i150 or iglidur A350)



The material offers excellent friction and wear values at low to medium loads.
Areas of application: 

Packaging machines
Textile machinery
Furniture design 



attributes_igumid_p150_3d_druck_material_description

&lt;span style=&#34;color: rgb(103,118,138);background-color: rgb(255,255,255);font-size: 13px;font-family: Lato, &#34;Helvetica Neue&#34;, Helvetica, Arial, sans-serif;&#34;&gt;iglidur® H2 | Low cost, for high temperatures&lt;span style=&#34;color: rgb(103,118,138);background-color: rgb(255,255,255);font-size: 13px;font-family: Lato, &#34;Helvetica Neue&#34;, Helvetica, Arial, sans-serif;&#34;&gt;When using iglidur® H2, economic aspects are in the focus. It is the first time that it is possible to offer such a high-performance material for high volume applications with these technical advantages at such a cost-effective price: temperatures up to +200°C, permitted surface pressure up to 110N/mm², and excellent chemical resistance. The iglidur® H2 material is self-lubricating and suitable for all motions.&lt;span style=&#34;color: rgb(103,118,138);background-color: rgb(255,255,255);font-size: 13px;font-family: Lato, &#34;Helvetica Neue&#34;, Helvetica, Arial, sans-serif;&#34;&gt;Typical applications

Automotive 


&lt;span style=&#34;color: rgb(103,118,138);background-color: rgb(255,255,255);font-size: 13px;font-family: Lato, &#34;Helvetica Neue&#34;, Helvetica, Arial, sans-serif;&#34;&gt;When to use it?

&lt;span style=&#34;color: rgb(103,118,138);background-color: rgb(255,255,255);font-size: 13px;font-family: Lato, &#34;Helvetica Neue&#34;, Helvetica, Arial, sans-serif;&#34;&gt;For use under water
&lt;span style=&#34;color: rgb(103,118,138);background-color: rgb(255,255,255);font-size: 13px;font-family: Lato, &#34;Helvetica Neue&#34;, Helvetica, Arial, sans-serif;&#34;&gt;When a cost-effective material is required for use at high temperatures
&lt;span style=&#34;color: rgb(103,118,138);background-color: rgb(255,255,255);font-size: 13px;font-family: Lato, &#34;Helvetica Neue&#34;, Helvetica, Arial, sans-serif;&#34;&gt;For applications with fuels, oils, etc.
&lt;span style=&#34;color: rgb(103,118,138);background-color: rgb(255,255,255);font-size: 13px;font-family: Lato, &#34;Helvetica Neue&#34;, Helvetica, Arial, sans-serif;&#34;&gt;Resistant to chemicals


&lt;span style=&#34;color: rgb(103,118,138);background-color: rgb(255,255,255);font-size: 13px;font-family: Lato, &#34;Helvetica Neue&#34;, Helvetica, Arial, sans-serif;&#34;&gt;When not to use it?

&lt;span style=&#34;color: rgb(103,118,138);background-color: rgb(255,255,255);font-size: 13px;font-family: Lato, &#34;Helvetica Neue&#34;, Helvetica, Arial, sans-serif;&#34;&gt;When extreme wear resistance is required
&lt;span style=&#34;color: rgb(103,118,138);background-color: rgb(255,255,255);font-size: 13px;font-family: Lato, &#34;Helvetica Neue&#34;, Helvetica, Arial, sans-serif;&#34;&gt;When vibration dampening is required
&lt;span style=&#34;color: rgb(103,118,138);background-color: rgb(255,255,255);font-size: 13px;font-family: Lato, &#34;Helvetica Neue&#34;, Helvetica, Arial, sans-serif;&#34;&gt;When neither increased temperatures nor media contact occur 



attributes_iglidur_uw160_material_description


Food compliant according to FDA and EU Regulation 10/2011
Blue colour for optical detectability 


Easy-to-process, abrasion-resistant filament for the printing of food grade components in blueThe iglidur i151 tribofilament is suitable for components with high wear resistance, as the material is filled with solid lubricants. It was specifically developed for use in the food and packaging industry: the printed components are compliant to FDA and EU Regulation 10/2011 and the blue colour ensures the required optical detectability. iglidur i151 is also an all-rounder material, and due to its good mechanical properties (strength, toughness, layer adhesion) it is suitable for most applications. iglidur i151 has comparable mechanical specifications as iglidur i150, by far the most frequently used igus filament. There are restrictions in terms of the maximum permanent application temperature of 65°C and for highly dynamic applications.

When to use it?

If the application requires a food grade material according to FDA or EU 10/2011
When an optically detectable material is required
For applications with low or medium surface speeds (safe up to 0.2 m/s, test for higher speeds)


When not to use it?

When the application temperature is higher than 65°C for a long time (→ iglidur i180 or iglidur J260 or iglidur A350 for food contact)
For highly dynamic applications (→ iglidur i180)
If food conformity, according to FDA ,and the blue colour are not necessary (→ iglidur i150)



attributes_igutex_tx1_material_description

attributes_iglidur_i8_3d_druck_material_description

drygear® apiro® installation option vertical flange

Descripcióndel producto

Datos técnicos

Descargas

drygear® apiro® installation option vertical flange

Descripción­del producto

Datos técnicos

Descargas

Descripcióndel producto