Ctra. Llobatona, 6
Poligono Noi del Sucre
08840 Viladecans Barcelona
Chiron-Werke GmbH is a manufacturer of CNC-controlled machining centres. The swivel head of a milling centre from the machine specialist rotates by over 90° around the workpiece to be machined. This enables faster machining of the workpiece and reduces costs thanks to even more processing options with a single machining operation.
The problem with this application was guiding the cables to the milling head from a large number of cables in an extremely tight installation space and under high accelerations (approx. 540° per second and about 90 movements per minute). It was necessary to make optimum use of the installation space while maintaining the service life of the energy supply system and cables.
Another challenge was that both energy chains had to be fitted with a number of links that could realise a reverse bend.
The machine manufacturer decided in favour of an energy chain solution from the igus product portfolio. Based on all the mechanical parameters, the best technical cable guidance for the requirement profile consisted of two B15i and B17 series energy chains, one inside the other. The B15i running on the inside is accompanied by the slightly larger B17 energy chain on the outside. Due to the tight installation space and the required pivoting movement, individual links of the chain were reworked and provided with a so-called RBR (reverse bend radius). Due to the connection to the moving end, a special solution also had to be designed, fixing both energy chains to the moving end at the same time. A special connection piece is used for this purpose today. The compact energy chains are ideal for the particularly tight installation space in the application. At the same time, they safely guide all cables in the system, even at high and fast-clocked travelling speeds.
